rsync to DSM results "Permission denied, please try again."

-

Can't rsync to DSM!

$ rsync -avz mystuff admin@onehost.onedomain.org:/volume1/MyShare/
Permission denied, please try again.
rsync error: rsync service is no running (code 43) at io.c(687) [sender=3.0.9]

Even ssh will result an error:
$ ssh admin@onehost.onedomain.org rsync
Permission denied, please try again.

Solution

$ rsync -avz -e ssh --rsync-path=/usr/bin/rsync \
       mystuff admin@onehost.onedomain.org:/volume1/MyShare/

The --rsync parameter is the key.

Older versions of DSM, rsync resides in /usr/syno/bin/, so use --rsync-path=/usr/syno/bin/rsync instead.


Comments

Post a Comment

Popular posts from this blog

DELL U4320Q ddccontrol in Linux switch input

-
Device i2c number $ sudo ddccontrol -p | grep /dev/  - Device: dev:/dev/i2c-8 this is the device i2c number. switch input source $ sudo ddccontrol -r 0x60 -w 4883 dev:/dev/i2c-8 -r 0x60: this is the input source switch. 4883: target port. DP1  15 or 4879 DP2  16 or 4883 HDMI1  17 or 4881 HDMI2  18 or 4882 USB-C 4891 read current value $ sudo ddccontrol -r 0x60 dev:dev/i2c-8 you can get the current value this way, if you have a different monitor model. Reference https://github.com/ddccontrol/ddccontrol-db/blob/master/doc/how-to-add-a-monitor.md https://askubuntu.com/questions/860761/ubuntu-command-line-to-change-input-source-on-a-display-monitor
Read more

UEFI boot.

-
GPT: GUID分区表。 ESP: EFI System Partition. It is the place where UEFI will look for a boot loader. 一个专用分区，UEFI 会从这类分区搜索boot loader。 NVRAM: 是BIOS ROM中的一段区域，一般定义为64k byte, 现在EFI把所有的变量都存在这里。 boot loader: 启动引导器。让机器知道真正的要启动的系统所在。GRUB (grubx64.efi)，Windows (bootmgfw.efi)，SYSLINUX (syslinux.efi)，都属于boot loader。 /EFI/Boot/bootx64.efi: UEFI fallback boot loader path，默认引导器路径。完整路径是\EFI\BOOT\BOOT{machine type short-name}.efi。当计算机没有引导条目或已存条目均无效时，尝试加载此文件。LiveCD和安装盘等就会用到这个文件。本文件其实就是grubx64.efi或者bootmgfw.efi，区别就是默认和指定的。 efibootmgr/Bcdedit: manipulate the UEFI Boot Manager。 创建和修改引导条目，保存在NVRAM。一般用于永久安装的系统，如安装好的Windows 10，而非安装盘或者LiveCD系统等。 常用路径 \EFI\boot\bootx64.efi \EFI\Miscosoft\Boot\bootmgfw.efi \EFI\Ubuntu\grubx64.efi \EFI\Ubuntu\shimx64.efi (secure boot) 查看NVRAM引导设置的命令： Linux: sudo efibootmgr -v Win10: bcdedit /enum firmware 参考： https://www.jianshu.com/p/a35d42daf010 https://www.happyassassin.net/posts/2014/01/25/uefi-boot-how-does-that-actually-work-then/ https://wiki.syslinux.org/wiki/index.php?...
Read more